Pen Twist n Stand Bonus Bundle

The Pen Twist ‘n' Stand was created to fill a need for a stable holder to secure your pens when using a UV lightbox to cure UV resin. Now you can get everything from the Original Bundle plus MORE!

Choose your Stand from the Original Pen Twist ‘n' Stand that holds 9 pens vertically for curing or the Twist ‘n' Stand Jr that holds 5 pens horizontally or vertically.

The Pen Twist n Stand Bonus Bundle also comes with:

• 1 Pen Twist ‘n' Stand or Twist ‘n' Stand Jr
• 9 Pen Twists
• 2 Prep Wands
• 1 Pen Cradle
• 2 Single Pen Displays
• 1 Sanding Block
• 2 Adhesive Sandpaper Strip

 Colors will vary and bundles may have mixed colors.

how to use:

The Pen Twist ‘n' Stand Bundle is easy to use – simply insert a Pen Twist into the empty tube of a pen and twist until the pen is secure. For the best fit, make sure to twist the pen down until there is only about a 2-3 mm gap between the edge of the pen and the base of the Pen Twist. Once the pen is secure, you can then twist a Prep Wand onto the Pen Twist and use that to hold your pen for painting, decorating, and applying UV resin/Epoxy/Crystalac.

When your pen is ready to cure, simply twist the Pen Twist onto the Twist Stand and place it under the UV light or in the sun* to cure. The Pen Twist ‘n' Stand may also be used to cure pens using the ‘hang' method or to set pens aside while curing/drying from paint, glue, and/or other mediums.

When your pen is cured/finished, twist the pen off of the Pen Twist, assemble your newly decorated pen, and Enjoy!

*The Twist Stands, Prep Wands, and Pen Twists are made from thermoset 3D filament. So, when placing these items in the sun – BE CAREFUL to not to allow them to get too hot or it could soften, melt, or warp. Pens with UV resin do not need to be left in the sun for longer than 15-20 minutes to achieve a proper cure.